Pneumatic 3 way ball valve
This Pneumatic 3 Way Ball Valve is an industrial-grade automatic multi-way fluid control valve with pneumatic intelligent actuation as the core, L/T port 3 way flow channel as the main function, and GB/ANSI standard flanged connection. Driven by the pneumatic actuator, the ball rotates 90° to quickly and accurately realize medium reversing, diverting, converging and mixing in pipelines.
Category：Three-way ball valve
Call Us Anytime
15669818867
Product Overview
This Pneumatic 3 Way Ball Valve is an industrial-grade automatic multi-way fluid control valve with pneumatic intelligent actuation as the core, L/T port 3 way flow channel as the main function, and GB/ANSI standard flanged connection. Driven by the pneumatic actuator, the ball rotates 90° to quickly and accurately realize medium reversing, diverting, converging and mixing in pipelines. It can be seamlessly connected to DCS/PLC industrial automatic control systems, with fast response, stable opening and closing, precise control, safety and explosion-proof performance. It is a special core equipment for automatic management and control of industrial multi-way pipelines.
Available in full sizes DN15–DN300 (NPS 1/2″–12″), it strictly complies with global general industrial valve standards including GB/T 12237, ASME B16.34 and API 6D. Widely used in HVAC, water treatment, petrochemical, power, food and pharmaceutical, heat exchanger units and other industrial automation scenarios.
Key Features
-
Core Heavy-Duty Pneumatic Actuator, Precise & Efficient Control
The product fully focuses on the core control demand of pneumatic actuation, optimized for industrial working conditions of 3 way ball valves:
- Full type coverage: Standard equipped with AT/GT series quarter-turn pneumatic actuators, full coverage of double acting (DA) / single acting spring return (fail-safe type), suitable for 0.4-0.8MPa industrial clean air supply, the fastest switching time is 0.5 seconds, perfectly suitable for frequent opening and closing and emergency shut-off working conditions;
- Full control accessory adaptation: Standard equipped with NAMUR standard interface, which can be seamlessly matched with explosion-proof solenoid valve, limit switch box, valve positioner, air filter regulator, handwheel mechanism and other accessories, realizing on-off remote control and 4-20mA analog flow proportional regulation, adapting to various industrial automatic control systems;
- High protection & explosion-proof adaptation: Standard IP67 protection grade, optional IP68 waterproof grade, ExdⅡBT4/CT4 explosion-proof grade, perfectly suitable for harsh industrial working conditions such as humid, dusty, flammable and explosive scenarios; built-in emergency manual operation mechanism, which can manually open and close the valve under air failure and fault conditions, ensuring the safety of emergency pipeline operation.
- Full type coverage: Standard equipped with AT/GT series quarter-turn pneumatic actuators, full coverage of double acting (DA) / single acting spring return (fail-safe type), suitable for 0.4-0.8MPa industrial clean air supply, the fastest switching time is 0.5 seconds, perfectly suitable for frequent opening and closing and emergency shut-off working conditions;
-
L/T Port Dual Flow Channel Options, Multi-Function for Full Scenarios
The core adopts an integrated L/T port flow channel ball, the inner wall of the flow channel is mirror polished with low flow resistance and no medium retention dead angle, which accurately matches the needs of different industrial working conditions:
- L Port Flow Channel: Realizes two-way medium reversing and cross switching control, replacing the combined function of 2 two-way valves, suitable for pipeline flow direction switching and medium cut-off scenarios;
- T Port Flow Channel: Realizes one inlet two outlets splitting, two inlets one outlet converging, three-way full flow mixing, replacing the combined function of 3-4 two-way valves, suitable for multi-channel medium distribution, mixing and synchronous transmission scenarios;
Standard equipped with four-seat sealing structure with balanced force, which can realize reliable sealing in both forward and reverse directions, eliminating cross flow and internal leakage problems.
- L Port Flow Channel: Realizes two-way medium reversing and cross switching control, replacing the combined function of 2 two-way valves, suitable for pipeline flow direction switching and medium cut-off scenarios;
-
Structure Optimized for Working Conditions, Bidirectional Zero Leakage & Stable Operation
Accurate structure matching according to diameter and pressure: Floating ball structure is standard for DN15-DN50, which realizes self-tightening sealing by medium pressure, the higher the pressure, the tighter the seal; trunnion mounted ball double support structure is standard for DN65-DN300, which greatly reduces the opening and closing torque under high pressure working conditions, and still opens and closes smoothly without jamming under large diameter conditions.
Two sealing options are provided: soft seal type is standard equipped with PTFE/PPL wear-resistant valve seat, paired by high-precision grinding, the sealing grade reaches ANSI B16.104 Class VI bidirectional zero leakage; metal hard seal type is overlaid with Stellite hard alloy, high temperature and erosion resistance, suitable for harsh scenarios such as steam and particle-laden media.
-
Standard Industrial Flanged Connection, Reliable Sealing & Easy Installation
The full series takes GB/ANSI standard flanged connection as the core standard configuration. Flange dimensions, sealing surface and bolt hole spacing are 100% in line with GB/T 9113 and ASME B16.5 industrial flange standards, with standard RF raised face sealing surface, optional RTJ ring joint face sealing for high pressure working conditions. It can be directly and seamlessly connected with domestic and foreign industrial pipelines of the same standard without modification and adaptation. The flange butt seal matched with special metal spiral wound gasket remains no external leakage and no looseness even under high pressure alternating load and cold and heat cycle conditions, with safe and stable long-term operation and convenient disassembly and maintenance.
-
Full Series Material Options & Multiple Safety Structures, Industrial-Grade Stable & Durable
All core parts provide full material options of WCB carbon steel, CF8(304), CF8M(316) stainless steel, adapting to various working conditions such as water, steam, oil, gas, corrosive media. The full series is equipped with industrial-grade safety protection as standard: anti-static structure, bottom-mounted T-type blow-out proof stem, API 607 fire-safe structure, which fully eliminates potential safety hazards such as electrostatic explosion, stem rushing out and medium leakage. It is stable and durable for long-term operation, with extremely low operation and maintenance cost in the whole life cycle.
